Replacing your windshield wiper blade rubbers is essential for safe driving in rain and snow. It is a simple process that should only take a few minutes. Gather the required tools and new wiper blade rubbers. Raise the wiper arms and carefully remove the old rubber strips from the blades. Next, insert the new rubber into the wiper frames. Lastly, test the wipers for proper operation and efficient windshield cleaning.
Windshield Wiper Blade Rubber Replacement for Toyota Corolla: Step-by-Step Guide
Follow these steps to replace windshield wiper blade rubbers for the Toyota Corolla:
1: Preparation
Before beginning, gather the necessary tools and materials to replace your wiper blade rubbers easily. You’ll need:
- Replacement wiper blade rubbers designed for your Toyota Corolla.
- A small screwdriver.
- Clean cloth or paper towels to wipe the wiper blades and the windshield glass.
Verify the new rubber’s length and style to fit your Corolla’s wiper blades.
2: Wiper Blade Inspection
- Lift the Wiper Arms: Lift the wiper arms into a vertical position.
- Examine the Old Rubbers: Observe the rubbers for wear, cracks, or hardening. Damaged rubbers cause streaking or reduced wiping efficiency.
3: Remove the Old Rubber Strips
Removing the old rubber is a critical part of the process.
- Find the Retaining Clips: Locate the wiper blade frame for the clips or tabs holding the rubber strip.
- Push out the Rubber: Gently press the retaining clips and slide the rubber out of the frame. Some wipers require a small screwdriver to release the clips.
- Throw Away the Used Rubber: Dispose of the used rubber strips properly to avoid littering or harming the environment.
Handle the removal process carefully to avoid damage to the wiper frame.
4: Ready and Install the New Rubber
A new rubber installation ensures that the wipers function correctly.
- New Rubber Alignment: Measure the length of the replacement rubber against the old one. When necessary, cut the new rubber at the trimmed length to ensure a perfect fit.
- Insert into the Frame: Slide the new rubber into the wiper blade frame, ensuring it aligns with the retaining clips or grooves to fix it securely in place.
- Secure in Place: Press the rubber gently into clips until it snaps into place. Make sure that it’s tightly seated and flat.
5: Test the Wipers
Once the new rubber is installed, test the wipers to ensure they work properly. Put the arms back on the windshield while being careful with the new position. Turn on the wipers with windshield washer fluid applied. Ensure that the new rubber strips clean windshields properly without streaks and do not leave gaps. If the cleaning is not as desired, re-adjust the alignment and rubber’s position.
Common Issues and Troubleshooting
- Poor Fit: If the rubber doesn’t fit properly, check that it’s the correct size and type for your Toyota Corolla.
- Improper Cleaning: Streaks during the cleaning process might be due to misaligned rubbers or debris within the blade frame.
- Noisy Operation: Squeaking wipers are caused by debris on the windshield or the rubber.
- Slipping Rubber: Check the retaining clips to ensure they are securely holding the rubber in place.
- Broken Wiper Frame: Inspect the frame for bends or cracks that could affect the rubber’s functioning.
- Neglecting Rear Wiper: Failure to change rear wiper rubber results in poor rear visibility during unfavorable weather.
Windshield Wiper Blade Maintenance
- Clean Frequently: Clean the blades and windshield with a damp cloth to remove grime and debris.
- Inspect Periodically: Check the blades every three to six months for signs of wear, especially before the rainy season.
- Replace Every Year: Replace the wiper rubbers yearly for perfect performance.
- Do not Wipe Dry: Use the windshield washer fluid to minimize friction while cleaning.
- Store Carefully: If possible, use wiper covers to protect the rubbers in extreme temperatures.
- Check the Frame: Check the wiper frame for bends or rust that might affect performance.
- Keep Washer Fluid Full: Ensure the washer fluid reservoir is full for efficient cleaning.
Conclusion
One of the most practical ways to enhance clear visibility and ensure safe driving is to replace the wiper blade rubbers in your Toyota Corolla. First, gather all necessary tools and replacement rubbers, lift the wiper arms, and check for worn-out blades. Then, carefully remove the old rubber strips and insert the new ones into the frame. Lastly, test the wipers to ensure they are working perfectly. At Glass4Car, we provide professional and certified wiper blade installation and repair services for maintaining your car’s safety and functionality.
